-
Horizontal directional drilling rig
View Products
Water well drilling rig/drilling machine
View Products
Wheel-type pile driver
View Products
Air compressor
View Products
OPEN-PIT ROCK DRILLING MACHINE WITH CABIN
View Products
-
-
language
PRODUCTS
Dedicated to drilling equipment, committed to global engineering collaboration.
Goodeng GMD40S Integrated DTH Surface Drilling Rig
Goodeng GMD40S integrated DTH surface drilling rig for 90–130 mm holes, 24 m depth, 176 kW power, 18 bar pressure and automatic rod changing.
ZL-940 Highway Guardrail Pile Driver
The ZL-940 is a self-propelled highway guardrail pile driver designed for installing and extracting roadside guardrail posts. It is suitable for highway, expressway and road-safety barrier construction where steel posts need to be driven directly into the ground. According to the Vietnam-site specification, the machine is powered by a 78 kW engine and equipped with a TZ360 hydraulic hammer. It provides a pile pulling force of 96.5 kN and a typical piling depth of 2–2.4 m. The machine supports round steel posts including Φ114×4.5 mm and Φ140×4.5 mm, as well as 130×130 mm square posts.
KQL-90 Underground Water Well & Geological Drilling Rig
The KQL-90 is a compact electric drilling rig developed for underground geological and well-drilling work. The Vietnam-site page positions it for vertical wells, ventilation holes, exploration drilling, deep-water applications and lined holes in engineering tunnels and underground mines. Its compact structure is suitable for tunnel spaces, while a 18.5 kW electric motor, 2000 N·m torque and 110–160 r/min rotation speed support drilling depths of 60–100 m and hole diameters of 65–140 mm.
GS130-LS Compact Horizontal Directional Drilling Rig
The GS130-LS is a compact crawler horizontal directional drilling rig designed for urban and utility trenchless work. The Vietnam-site specification lists 135 kN maximum thrust/pullback force, 4,500 N·m maximum torque, 93 kW engine power and 200 L/min maximum mud-pump flow. A recommended reaming diameter up to 700 mm and crossing length up to 200 m make the GS130-LS suitable for smaller pipeline and cable installations where maneuverability and a limited jobsite footprint are important.
KJD 15 Mini Horizontal Directional Drilling Rig
The KJD 15 is a compact mini HDD rig intended for trenchless pipe and utility installation where transportability and a smaller machine footprint are important. According to the Vietnam-site specification image, the machine provides 250 kN pull force and 250 kN push force, uses a 118 kW engine rated at 2200 r/min, and weighs approximately 3,600 kg. Its listed dimensions are 4100×1950×1900 mm, with Φ60×2000 mm drill rods and a maximum listed flow of 160 L/min.
GS150-LS Compact Horizontal Directional Drilling Rig
The GS150-LS is a compact horizontal directional drilling rig for urban trenchless construction and short-to-medium underground utility projects. The Vietnam-site configuration lists 97 kW engine power, a maximum push/pull speed of 46 m/min, 193 r/min maximum rotation speed and a 180 L/min mud system. Its compact 4,660 kg design and 4300×1700×2000 mm dimensions make it easier to transport and position in restricted jobsites. The listed working range includes reaming up to 700 mm and crossing distances up to 200 m, subject to ground conditions.
GS320-LS Horizontal Directional Drilling Rig
The GS320-LS is a mid-size horizontal directional drilling (HDD) rig designed for trenchless installation of water, gas, power and communication pipelines. Based on the Vietnam-site specification, the rig combines 350/700 kN maximum thrust/pullback, 12,600 N·m maximum torque and 153 kW engine power with a compact crawler platform. With a recommended reaming diameter up to 900 mm and crossing length up to 400 m, it is well suited to municipal utility construction, road crossings and medium-scale pipeline projects.
JH350S Hydraulic Water Well Drilling Rig
The JH-350S well drilling rig is powered by a robust engine and can be equipped with a large‑diameter impactor, enabling it to handle hard geological formations with ease and significantly boosting drilling efficiency. Its reinforced heavy‑duty chassis and wide‑track chain system enhance stability while evenly distributing the rig’s weight across the ground, ensuring more reliable and steady operation.
S98D Diesel-Powered Stationary Air Compressor
With multiple product lines spanning piston, screw, and centrifugal air compressors, we serve key industries such as steelmaking, machinery manufacturing, textiles, and chemicals…
S95T Diesel-Powered Stationary Air Compressor
The S95T diesel‑powered stationary air compressor is equipped with a high‑output Yuchai diesel engine, eliminating the need for an external power supply. It is ideally suited for off‑grid applications such as construction sites, mines, and water‑well drilling. With a large displacement and high working pressure, it delivers a reliable air supply for drilling, rock‑breaking, and other construction tasks. Its robust stationary frame ensures stable performance under heavy continuous loads over extended periods.
S85D Diesel-Powered Stationary Air Compressor
The S85D diesel‑powered stationary screw air compressor is equipped with a Yuchai 228 kW diesel engine, eliminating the need for an external power supply. It is ideally suited for water‑well drilling, mining rock‑drilling, and field construction operations. With a displacement of 24 m³/min and a rated pressure of 22 bar, it features a large 380 L fuel tank, enabling long‑duration continuous heavy‑load operation. The unit boasts a robust overall structure, excellent heat dissipation, and straightforward, convenient maintenance.
S85T Diesel-Powered Stationary Air Compressor
The S85T diesel‑powered stationary air compressor is equipped with a Yuchai diesel engine, requires no external power supply, and is ideal for well drilling, rock excavation in mines, and field construction applications. Featuring two‑stage high‑pressure compression, it delivers stable air delivery, making it well suited for off‑grid job sites. The robust all‑steel frame ensures reliable performance during extended continuous operation, while its design facilitates convenient maintenance.
S60T Diesel-Powered Stationary Air Compressor
The S60T diesel‑powered fixed‑type screw air compressor is equipped with a Yuchai 162 kW diesel engine, eliminating the need for an external power supply. It is ideally suited for well drilling, mining operations, and off‑grid construction sites. Featuring two‑stage compression, it delivers an air output of 18 m³/min at a working pressure of 18 bar. The unit boasts a compact, robust design that supports prolonged continuous operation, requires minimal maintenance, and is well‑matched to small and medium‑sized drilling projects.
BK55‑10 Industrial Screw Air Compressor
Kaisan BK55‑10 industrial screw air compressor, powered by a 55 kW motor, features air cooling and single-stage compression. It delivers a rated pressure of 10 bar (1.0 MPa) and an air delivery rate of 8.5 m³/min. The unit boasts a compact design, an intelligent control panel, and supports 24-hour continuous operation. It is widely used in factories, paint‑spraying applications, mining equipment, and for supplying compressed air to machinery, offering simple and reliable maintenance. Kaisan.
BK55‑8GH Industrial Screw Air Compressor
Kaisan BK55‑8GH industrial screw air compressor, powered by a 55 kW motor, features first-stage oil-injected screw compression, a rated pressure of 8 bar (0.8 MPa), and an air delivery rate of 10 m³/min. It boasts an air-cooled design and an intelligent control system, enabling 24-hour continuous operation. Widely used in factory assembly lines, sandblasting, and as a reliable air supply for equipment, it offers simple maintenance and is both economical and practical.
Industrial oil-injected screw air compressor LGBP75-13GA
Industrial oil-injected screw air compressor LGBP75‑13GA, 75 kW, with a working pressure of 13 bar. This air-cooled, single-stage compression model is designed for continuous industrial operation. It delivers stable airflow, low noise, and reliable performance, making it ideal for heavy-duty applications such as pneumatic tools, laser cutting, and manufacturing workshops.
BMVF37 | Permanent Magnet Variable-Frequency Oil-Injected Screw Air Compressor
The Kaishan BMVF37 is a 37 kW permanent‑magnet variable‑frequency oil‑injected screw air compressor with a pressure regulation range of 0.65–1.0 MPa. It automatically adjusts its air output to match the workshop’s actual air demand, delivering significant energy savings compared to line‑frequency models. Featuring an air‑cooled design, it ensures long‑term, continuous, and stable operation under industrial conditions.
Permanent Magnet Variable-Frequency Oil-Injected Screw Air Compressor BMVF22
The Kaishan BMVF series comprises oil‑injected, permanent‑magnet, variable‑frequency screw air compressors. Equipped with a high‑efficiency permanent‑magnet synchronous motor and a wide speed‑control range of 15%–100%, it automatically adjusts air output to match actual workshop demand, delivering 20%–30% energy savings compared with line‑frequency compressors. Featuring air‑cooled, single‑stage compression, it ensures stable, continuous operation and is suitable for ambient temperatures from 0°C to 45°C. The system delivers clean, low‑oil compressed air, making it ideal for modern manufacturing facilities.
Permanent Magnet Variable-Frequency Oil-Injected Screw Air Compressor BMVF715
The Kaishan BMVF715 permanent‑magnet variable‑frequency oil‑injected screw air compressor is equipped with a high‑efficiency permanent‑magnet synchronous motor and automatically adjusts its air output to match the workshop’s actual demand, delivering significant energy savings compared with line‑frequency models. Featuring air‑cooled, single‑stage compression, it ensures reliable, long‑term continuous operation in industrial settings while producing low‑oil, clean compressed air. Its intelligent control system ensures stable performance, easy maintenance, and seamless integration with a wide range of production environments.
Permanent Magnet Variable-Frequency Oil-Injected Screw Air Compressor BMVF7.5
The Kaishan BMVF7.5 is a 7.5 kW permanent‑magnet variable‑frequency oil‑injected screw air compressor. It features a high‑efficiency permanent‑magnet synchronous motor with a speed‑control range of 15–100%. The unit automatically adjusts its rated air delivery to match the workshop’s actual air demand, eliminating no‑load energy consumption and delivering 20–30% greater energy savings compared with line‑frequency compressors. With air‑cooled, single‑stage compression, it ensures long‑term, continuous, and stable operation in small to medium‑sized industrial workshops; its low oil content delivers clean compressed air for pneumatic equipment.
TZ‑360 Guardrail Piling Machine
Guardrail pile drivers are widely used in highway construction. This equipment is employed for piling operations, and some models can drive piles directly into the soil without the need for a concrete foundation.
ZL‑936 Guardrail Piling Machine
This machine is primarily used for the construction of highway guardrails at all levels. It can drive piles directly into the soil without requiring a concrete foundation, simplifying the construction process and significantly improving installation efficiency.
The equipment features full hydraulic drive, ensuring stable impact, precise positioning, and smooth pile penetration. It integrates piling, pile extraction, and drilling functions into one unit, making it suitable for various pavement types and complex ground conditions. With a compact body design, flexible relocation, and low operation and maintenance costs, it is the preferred choice for road safety‑related projects.
Crawler-type well drilling rig FY800
Equipped with a 194-kW Cummins six-cylinder turbocharged diesel engine, it delivers robust power and long service life.
It features upgraded composite drill rods, reinforced hydraulic cylinders, and a strengthened tower structure, enhancing overall machine stability.
The machine is fitted with an Italian-imported three‑way hydraulic pump and comes standard with a foam pump, winch, multi‑function generator, and a front‑mounted telescopic boom cylinder.
The main boom is equipped with protective baffles, effectively safeguarding the hydraulic cylinders and extending component lifespan.
With a large drilling diameter, deep penetration depth, and fast feed rates, it offers outstanding construction efficiency.
The chassis incorporates quenched‑and‑tempered steel sprockets, a reinforced load‑bearing frame, and widened track plates, ensuring strong load capacity and long‑term durability.
A parallel transmission layout provides efficient power distribution, while a specially optimized hydraulic system ensures easy maintenance and low operating costs.
Equipped with a 153-kW Cummins turbocharged engine, it delivers robust power and long service life. — Features an optimized composite boom, upgraded hydraulic cylinders, and a reinforced tower structure.
Hebei Kaijin Machinery Equipment Trading Co., Ltd.
39 Tanan Road, Yuhua District, Shijiazhuang City, Hebei Province
